BX700UIFeatures

APC Back-UPS 700VA, 230V, AVR, IEC Sockets

• Automatic Voltage Regulation (AVR)
  Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• Telephone dataline surge protection
  Provides protection of connected equipment from power surges traveling on telephone lines.
• USB connection
  Use your PC to access additional power protection and management features for your UPS via a USB Port.

Back-UPSFeatures & Benefits

Marketing Features

• Battery-protected and surge-only outlets
  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Manageability

• LED status display
  Quickly understand unit and power status with visual indicators.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions

Safety

• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Protection

• Battery and surge protected outlets
  Back up and protect your hardware and data during power outages, surges and spikes.
• Surge only outlets
  Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  
  

  Output

  • Output power capacity
    390Watts / 700VA
  • Max Configurable Power (Watts)
    390Watts / 700VA
  • Nominal Output Voltage
    230V
  • Output Frequency (sync to mains)
    50/60 Hz +/-1 Hz
  • Topology
    Line Interactive
  • Waveform type
    Stepped approximation to a sinewave
  • Output Connections
    (1) IEC Jumpers (Battery Backup)

    (4) IEC 320 C13 (Battery Backup)
  • Transfer Time
    4ms typical

  Input

  • Nominal Input Voltage
    230V
  • Input frequency
    50/60 Hz +/- 3 Hz (auto sensing)
  • Input Connections
    IEC-320 C14
  • Cord Length
    1.22meters
  • Input voltage range for main operations
    140 - 300V
  • Number of Power Cords
    1

  Batteries & Runtime

  • Battery type
    Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Typical recharge time
    6hour(s)
  • Replacement Battery
    APCRBC110
  • Expected Battery Life (years)
    3 - 5
  • Battery Volt-Amp-Hour Capacity
    81
  • 
    
    
    
    
    
  • 
    
    
    

  Communications & Management

  • Interface Port(s)
    USB
  • Control panel
    LED status display with On Line : On Battery : Replace Battery and Overload indicators
  • Audible Alarm
    Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

  Surge Protection and Filtering

  • Surge energy rating
    273Joules
  • Data Line Protection
    RJ-11 Modem/Fax/DSL protection (two wire single line)

  Physical

  • Maximum Height
    200mm , 20.0cm
  • Maximum Width
    115mm , 11.5cm
  • Maximum Depth
    256mm , 25.6cm
  • Net Weight
    6.0kg
  • Shipping weight
    6.5kg
  • Shipping Height
    275mm , 27.5cm
  • Shipping Width
    295mm , 29.5cm
  • Shipping Depth
    340mm , 34.0cm

  Environmental

  • Operating Environment
    0 - 40 °C
  • Operating Relative Humidity
    0 - 95% no %
  • Operating Elevation
    0-3000meters
  • Storage Temperature
    -15 - 40 °C
  • Storage Relative Humidity
    0 - 95% no %
  • Storage Elevation
    0-9000meters
  • Audible noise at 1 meter from surface of unit
    45.0dBA